trolls_wall-caddy-2-logo

If your little crafter needs some extra help organizing their desk, this project is the perfect solution. With no sewing required, almost anyone can make this wall storage hanger!

Supplies and Tools:

  • 1/2-yd. DreamWorks Trolls Poppy Rainbows fabric
  • 1/2 Coordinating fabric
  • 1/2” Binding 2 pkgs. (double fold)
  • 1/4 Wonder-Under (fusible web)
  • 1/2 Double fusible fleece
  • Trolls Fablique
  • Fabric glue (permanent)
  • Clear adhesive tape (permanent)
  • Grommets (1” Curtain grommets)
  • Iron/ironing surface

Directions:

  1. Cut two 18”x26” rectangles  from coordinating fabric and one fusible
  2. Sandwich the fusible fleece between the fabric (right side out) and press according to instructions =
  3. Measure 1-1/2” down from the sides of the top left and right corner of panel and mark the Measure 9-1/2” over from the side and 1-1/2” down from the top and mark the spot. Attach the grommets following package instructions.
  4. Cut one 18” x 12” rectangle from the DreamWorks Trolls Poppy Rainbows and cut one 18” x 6” from Wonder-Under. Fold fabric in half, press, and fuse it together with the Wonder-Under  = pocket.
  5. Apply the adhesive tape to both sides and bottom of the pocket (leave top open) following package Peel the  protective strip off of the tape and center the pocket on the  panel and press in place.
  6. Fuzzy-cut one 8” x 5” strip from the DreamWorks Trolls Poppy Rainbows and cut one 4” x 5” from Wonder-Under. Fold fabric in half, press, and fuse it together with the Wonder-Under = pocket. Follow instructions  in step 5 to
  7. Fuzzy-cut one 14” x 2-1/2” strip from the DreamWorks Trolls Poppy Rainbows and cut  one 7” x 2-1/2” from Wonder-Under. Fold fabric in half, press, and fuse it together with the  Wonder-Under  = pocket. Follow instructions  in step 5 to
  8. Cut two 19-1/2” strips from Apply a line of glue on the inside of the binding edge, press in place and let dry. Cut twenty-eight 1/4” strips from adhesive tape. Apply tape on both ends and every 1-1/2” across strips. Position the end of the strip on the side of the panel and press in place.  Fold the strip to create loops across panel 1/2” (see loop diagram) Loop strips. Repeat for the other strip.
  9. Cut one 9” strip from Apply a line of glue on the inside of the binding edge, press in place and let dry. Cut three 1/4” strips from adhesive tape. Apply tape on both ends and in the center of strip. Position the end of the strip on the  side of the panel and press in place. Fold the strip to create two loops (see loop diagram) = Large loop strip.
  10. Cut two 18-1/2” strips and cut two 26-1/2” strips from Fold both ends 1/4” in and press. Apply glue to the front side edges of the panel. Attach the binding, hand press in place. Repeat for the other sides and let dry. Fold binding over to the back of the panel, glue and press. Repeat for all sides.

trolls-wall-caddy-template

 

 

 

 

Skill Level:  Some experience necessary
Approximate Crafting Time: Varies